Energy | Technology Licensing

Available Technologies by Category

ZnO Nanowire Structures to Flexible Substrates A fabrication process to grow horizontal, high aspect ratio ZnO nanowires on a ZnO substrate	5110
Zeolite Membrane Sieves Fabricated on Low-Cost Alumina Hollow Fiber Substrates For gas separation in energy production technologies	8080, 8167
Variable Scaling for Computing Elements Systems, methods, and computing units to provide for variable scaling of computing elements	3768
Two-Phase Thermal Management System for Integrated Motor Cooling For better performance, capabilities, and reduced motor size and weight for electric transportation applications	8280
Thin Current Spreading Layers Improve Breakdown Performance For high-power III-nitride devices	8789
Syntactic Foam For Use As a Noise Suppressor A process for manufacturing syntactic foams with micro-sphere inclusions for use as a noise suppression	6730
Self-Powered Sensor for Transportation Monitoring A transparent and flexible NG (TFNG) using a ZnO nanowire (NW) array on a polydimethylsiloxane (PDMS) substrate	6084
Scalable Manufacturing Approach of Graded Polymer Thin Film Has Potential for Widespread Use Existing Techniques for Fabricating Patterned Thin Films Fall Short	8994
Root-Inspired Ground Anchor High capacity earth retention and deep foundation systems	8424
Rapid PSA Adsorbent filled porous fibers that can be formed into a module to enable controlled contact with a feed stream	3486
Quantitative Control with Ion Utilization Quantitatively controlling the number of ions generated allows for high mass spectrometry sensitivity and opens up the possibility of charge-resolved analysis and ion utilization	7336
Power Generation via Traveling Domains Improved methods and circuits for generating millimeter-wave oscillations	5144
Poroelastic Solutions for Spherical-Tip Indentation A method for addressing current challenges in characterizing poroelastic materials	7870
Novel Wireless Network Architecture with Frame Aggregation Scheme A system with unique power-saving capabilities that increases the quality and expands the capacity of wireless signaling for applications like subterraneous seismic surveying	8404
Next-Generation Flow Battery for Large-Scale Energy Storage at One-Tenth the Cost Dramatically lowers fabrication costs while achieving higher power density	8284, 8571
More Efficient Method for Electrochemical Reduction of Carbon Dioxide Eliminating the need for energy-intensive separation processes in production of ethylene and hydrogen	8875
Minimizing Power Failure from Weather Disruptions Framework which improves resilience of electrical power during severe weather	6665
Methods to Impart Color and Patterns on Metal A method of coloring metal surfaces without damaging its properties	7327
Low-Temperature Solution for Growth P-Typed Zinc Oxide Nanowires A fabrication technique to synthesize arrays of long aligned antimony (Sb) doped p-type ZnO nanowires in a low temperature, aqueous environment. Specifically, a ZnO precursor, such as zinc nitrate (Zn(NO3)2) is mixed with hexamethylenetriamine and PEI	6096
Low Temperature Extraction of Hydrogen From Biomass A method of using sawdust as a renewable source of hydrocarbons for hydrogen production	3949
Hyper Resonance Wireless Power Transmission Magnetic hyper-resonant coupling among multiple inductive-capacitive resonators	6291
Heat Dissipation for Microelectronic Systems via Capillary Trap Enables hot-spot chip cooling via thin-film evaporation	6272
GPCR-Based Biosensors for Medium-Chain Fatty Acids Biosensor to increase production of microbes for biofuel production	6767
Fully Passive, Long-Range Radio-Frequency Identification (RFID) via 5G Leveraging a Rotman lens-based RFID system for mm-wave harvesting and ultra-low power communications in Internet of Things (IoT) technology	8141, 8439
Flexible Power Generation with Negative Carbon Emissions Uses low-cost natural gas for electricity generation while reducing CO2 in the environment	8834
Electrical Contact Geometry for Switchgear Applications Switch-contact geometries and using finite elements analysis to compare the contact geometries with respect to the maximum electric field, mass, and contact resistance	7703
Droplet Impingement Planar-Array-Micro-Reactor A planar-array-micro-reactor structure that enables direct chemical conversion of liquid reagents	4099
Drive Belt with Surface Texture to Minimize Vibrations Enabling belt system designs with improved performance for household products and industrial machinery	8307
Crosslinked Membranes for Natural Gas Purification Membrane technology that achieves better gas purity by reducing membrane plasticization	6419
CNT-Based Devices Using Thin-Film Technologies A thin-film triode design for CNT-based field emission to reduce the size and increase the efficiency of carbon nanotube (CNT)–based field emission devices	5806
Anodically Coloring Molecular Electrochromics (EC) Improve Contrast, Color, and Transitions Fully transparent, color-neutral states that can switch to a full palette of vibrant colors are difficult with current cathodically coloring polymers	7745
Aerodynamically-Adaptive Platforms using Distributed Bleed Flow Control A system for improved control of the aerodynamic and structural loads on flight and ground platforms using distributed active air bleed driven through the aerodynamic surfaces	6238
A Solid Phase Reactive Separation System A purification technique that combines and yields the benefits of solid-phase reactors and liquid-phase chromatographic separators in a streamline, efficient process	6308
A Semiconductor Particle Detector Based on Work Function Modulation A small, inexpensive, scalable new mechanism for robust and reliable radiation detection	8410

<none>

<none>

Search form